CRX-10 app not finding the Robot
CRX-10 app not finding the Robot
Source : Link
After launching the app in the android tablet, you will get a message check cable connection followed by waiting for the connection
Resolution:
The link between the robot controller and the tablet uses the Ethernet protocol.
In order for it to work properly, you must ensure that WIFI is NOT enabled on the tablet.
You must also ensure that its IP address is set to static and that it is 1.1.0.12.
| Item | Value |
|---|---|
| IP Address | 1.1.0.12 |
| Netmask | 255.255.255.0 |
| DNS | 192.168.1.1 |
| Default Gateway | 192.168.1.1 |